XPG Cruiser evaluation: Going for the minimalist look? You will need this PC case.

ADATA goes all-out with its gaming vary of PC {hardware} below its XPG model, and the XPG Cruiser is one more superb addition to this product arsenal. The XPG Cruiser is a mid-tower PC case with loads of inside area for extra highly effective gaming and fanatic builds, supporting radiators for each AIO and customized loop liquid cooling.

Regardless of its mid-tower chassis measurement, the XPG Cruiser helps motherboard sizes as much as E-ATX, which is often reserved for extra superior parts. Throw in assist for as much as a 380mm radiator, an built-in RGB controller, and area to put in seven case followers, and the XPG Cruiser shouldn’t have any challenge with power-hungry parts.

The mid-tower section of the PC case market is a aggressive one, however we’ll see on this evaluation whether or not the XPG Cruiser has what it takes to seize a spot in our greatest PC instances assortment.

The XPG Cruiser is not the most costly case on the block, but it surely nonetheless instructions a price ticket of $110. It is a respectable chunk of change for a mid-tower PC case and places the Cruiser on the identical stage as NZXT, Corsair, and be quiet! instances. Contemplating this chassis rocks not one, however two tempered glass panels, the worth is an aggressive transfer from ADATA.

The XPG Cruiser is packaged effectively, and our evaluation pattern suffered no harm throughout transit. ADATA gives you with every little thing you have to create a PC contained in the XPG Cruiser, together with cable ties and screws. The 2 tempered glass panels every have a single strip of protecting movie to be eliminated. At first look, the XPG Cruiser is an curiously designed case.

At first look, the XPG Cruiser is an curiously designed case.

Upfront, there’s an angled piece of glass with a big cutout to the facet to permit the entrance three preinstalled XPG followers to drag in cool air. The proper facet of this panel has the XPG branding and a brushed aluminum impact. Up high is the place you may find the ability button, two USB-A 3.0 and single USB-C 3.1 Gen 2 ports, in addition to a twin audio jack for headsets.

Behind this array of entrance I/O are two fan mounts and a magnetic mud filter. The left facet panel is a big pane of tempered glass. The other facet panel is naked metallic and the rear is the same old affair of seven PCI slots (in addition to two horizontal), ATX PSU mount, motherboard cutout, and a single 120/140mm fan mount.

Putting in a PC contained in the XPG Cruiser is an easy course of, the identical as each different mid-tower case available on the market. An ATX PSU goes beneath the shroud that is commonplace with most chassis of immediately. As much as an E-ATX motherboard could be put in up entrance, in addition to a big GPU.

There’s ample area to put in a radiator and followers for an AIO liquid-cooling answer for the CPU, and you possibly can construct your personal customized loop, as long as you employ a fan mount for the pump and reservoir combo unit. Whereas there are solely six fan mounts, the XPG Cruiser continues to be able to pushing by way of severe quantities of air, because of the unobstructed entry on the entrance panel.

Apparently, the XPG Cruiser solely has a number of grommet cutouts for routing cables from behind the motherboard tray to parts on the entrance facet. This does lead to fairly the essential look on the within with no cable brackets or different design components to interrupt up a single sheet of metallic. However this does imply you may route cables higher to the GPU, energy, and different ports on the motherboard.

Thermal efficiency is nice. I threw an Intel Core i5-12600K processor and NVIDIA GeForce RTX 3060 GPU contained in the XPG Cruiser with 32GB of DDR5 RAM to see how it might carry out with mid-tier parts. Enjoying video games would not see the temperature for the 10-core CPU surpass 36 C with a 360mm AIO cooler.

XPG Cruiser: What’s not good

Cable administration contained in the XPG Cruiser is just not a robust level of this case. You are going to should battle the dearth of any cable routing on the rear facet of the motherboard tray. Clearance is round 40mm, which is sufficient for many builds, however must you need to add your personal fan and RGB controller, it can begin to flip messy.

Nonetheless, this may very well be thought-about a minor grievance for individuals who do not actually care a few messy cable scenario the place one can’t see with all facet panels put in. It is potential to create a clean-looking PC construct by way of tempered glass, and that is all that actually issues for many PC house owners.

XPG Cruiser: Competitors

There’s loads of competitors for the XPG Cruiser. NZXT is an enormous title within the PC case enterprise and has a number of beautiful chassis obtainable, specifically the NZXT H510. This case is available in a wide range of flavors, together with some particular CRFT variations which can be themed round common video video games.

NZXT does a stellar job with cable administration on all of its PC instances, permitting you to tidy every little thing up as soon as all of your parts have been put in. The corporate can also be engaged on including mesh to its assortment of chassis, additional enhancing airflow and thermal efficiency.

be quiet! is one other massive title for PC instances and its Silent Base 802 is unbelievable. Whereas somewhat bigger than the NZXT H510 and XPG Cruiser, the 802 packs a punch the place it issues most. You’ll be able to set up just about something inside this case and have greater than enough airflow for cooling.

Lastly, there’s the exceptionally good Lian Li O11D. I reviewed the smaller Lian Li O11D Mini, which provides all of the aforementioned instances a run for his or her cash. In order for you one of the best PC case cash should purchase proper now, I would advocate the O11D vary.

You should purchase this if …

• You need a sleek-looking, inexpensive PC case
• You do not really feel snug spending greater than $110
• You could have a full-sized motherboard and enormous GPU
• You need a PC case with good thermal efficiency

You should not purchase this if …

• You need a PC case with wonderful cable administration
• You need a compact small-form-factor PC case
• You need to set up a radiator bigger than 280mm up high

The XPG Cruiser from ADATA is a really compelling case if you’d like a compact, sleek-looking PC. There’s sufficient inside area to carry an E-ATX motherboard, the biggest GPU you may throw at it, and some storage drives. The value is each enticing and aggressive, permitting one to select up a case with good thermal efficiency for somewhat over $100.

4
out of 5

It is not all excellent news with the XPG Cruiser, nevertheless. This chassis does not have one of the best cable administration. Actually, it is not good for 2022 requirements, particularly when in comparison with a few of its competitors. Nonetheless, as long as you may overlook a clumsy mess of cables behind the motherboard tray, you may create one awesome-looking PC with this case.